Reset Password
If you've forgotten your password, you can enter your email address below. An email will then be sent with a link to set up a new password.
Cancel
Reset Link Sent
If the email is registered with our site, you will receive an email with instructions to reset your password. Password reset link sent to:
Check your email and enter the confirmation code:
Don't see the email?
  • Resend Confirmation Link
  • Start Over
Close
If you have any questions, please contact Customer Service
Hookup, Find Sex or Meet Someone Hot Now

What Is This?  

redrockrascal 65M
8395 posts
2/20/2018 3:52 pm
What Is This?


As some of you may have read in my prior posts, like HNW Tools , I am a tool guy and I am also on a “tool porn” site. It’s a site where guys, mostly, discuss tools (new, old, good, bad, but not the flesh type) and the projects (cars, homes, etc.) they are working on. Some guys are just tool collectors and don’t really use them much. They keep them shiny clean; they’re called “tool polishers” which is essentially the equivalent of masturbating here. They also bitch about things – you know, kinda like here.

Occasionally someone asks “What is this tool?” and posts up a pic of the tool in question. Earlier today a guy posted a ‘what is this’ with the picture below that brought this site to mind. I thought of this site because a few guys thought it may be some sort of antique nipple clamp. So I figured I would go to the experts on such things.





When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


Oscarmike12 30M
19 posts
3/18/2018 11:25 pm

I agree with the others, clamps for nipples lol


ltrskr 75M

3/18/2018 5:35 pm

This tool was used to adjust for skim and wobble on the Johnson rods of a 1932 Whipple, however, the lady of the house was in the garage one evening, naked I might add, looking for a new turn on, clamped it on her nipple and invented the Whipple Nipple clamp!

WTF!


redrockrascal 65M
23580 posts
3/14/2018 6:25 pm

Could be

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


RedMale233 33M
32 posts
3/11/2018 3:17 pm

Nipple stimulator


redrockrascal 65M
23580 posts
3/8/2018 6:29 pm

    Quoting  :

Very good analysis, thank you. Your usage suggestion is interesting do you need a volunteer?

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/28/2018 8:07 pm

    Quoting marriedcretin:
    It looks a bit home made so it was probably made for a specific job. I'm on a tractor forum so I understand where you are coming from!
    We have a whole thread for harbour frieght tools that aren't shite!
OMG, the Harbor Freight arguments sometimes makes the arguments here look like shite.

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/28/2018 8:05 pm

    Quoting FMAOPLS:
    Better a "tool guy", than a Tool, I say.

    I have no idea - but my guess would be that it is some kind of clamp, used for "holding things together".
I'm a "tool guy" with lots of tools, most metal, one tool definitely not metal. Your guess is duly noted.

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


marriedcretin 53M
1324 posts
2/28/2018 7:17 pm

It looks a bit home made so it was probably made for a specific job. I'm on a tractor forum so I understand where you are coming from!
We have a whole thread for harbour frieght tools that aren't shite!


FMAOPLS 70F
27112 posts
2/28/2018 2:16 am

Better a "tool guy", than a Tool, I say.

I have no idea - but my guess would be that it is some kind of clamp, used for "holding things together".

Check out my profile or and become a "watcher" of my blog FMAOPLS,to learn more about me, and for intelligent, lively, smartassy and fun discussion, with a little irreverence thrown in. "Like" or comment on my photos, and I promise I'll add more. Thanks.


redrockrascal 65M
23580 posts
2/26/2018 8:36 am

    Quoting TicklePlease:
    This definitely falls under the category of "posts that I'd read just for the comments"

    Can't wait to find out what it is!
I'll let you know soon as I find out. Then maybe WE could try it out

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/26/2018 8:34 am

    Quoting  :

Even the tool site guys haven't figured it out.

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


TicklePlease 56F  
13851 posts
2/25/2018 4:56 pm

This definitely falls under the category of "posts that I'd read just for the comments"

Can't wait to find out what it is!


redrockrascal 65M
23580 posts
2/24/2018 6:31 pm

    Quoting  :

The Motion Pro type of tool is a lot better suited for working one valve shims.

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/24/2018 6:29 pm

    Quoting  :

I'll show you how to get the best out of both.

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/23/2018 6:37 pm

    Quoting sweet_VM:
    Great tool. Very interesting. Happy HNW Day to you hugs V
Thank you Sweets

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/23/2018 6:36 pm

Thank you for viewing my tool post

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/23/2018 6:35 pm

    Quoting  :

Always protect your boobs

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/23/2018 6:34 pm

That might make one's cock old quickly

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/23/2018 6:33 pm

    Quoting  :

Well that sure is a detailed response. I wouldn't use that on valve shims though. The "teeth" on that thing could possibly damage the machined surfaces of the shim and transfer to the cam or rockers.

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


sweet_VM 65F
81699 posts
2/23/2018 4:53 pm

Great tool. Very interesting. Happy HNW Day to you hugs V

Become a blog watcher sweet_vm


rm_two4four4fun 56M/52F
1 post
2/23/2018 3:21 pm

I love this post!


bigblackman21221 53M
4080 posts
2/22/2018 8:35 am

It's an old school cock ring.


redrockrascal 65M
23580 posts
2/22/2018 6:14 am

    Quoting  :

It does have the look of a caliper but it is a clamp of some sort. You also had a car on your bottom.

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/22/2018 6:13 am

    Quoting  :

If someone on the tool site comes up with exactly what it is I will post it here.

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/22/2018 6:11 am

    Quoting Classynails:
    Obviously not, I have no clue what it is. You going to tell us?
So far no one on the tool site has come up with exactly what it is.

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


Classynails 66F
1675 posts
2/21/2018 3:23 pm

Obviously not, I have no clue what it is. You going to tell us?

Classy, Sassy, and a little Smart-Assy
Sine Metu
CN


redrockrascal 65M
23580 posts
2/21/2018 2:50 pm

    Quoting  :

Good analysis. As good if not better than the guys on the tool site.

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/21/2018 2:49 pm

    Quoting Classynails:
    I'm very mechanically declined but I am going to guess some sort of C-clamp? Pipe clamp?
Sooo you've never use one?

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/21/2018 2:48 pm

No one does so far

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/21/2018 2:46 pm

    Quoting  :

No one knows for sure

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/21/2018 2:45 pm

    Quoting MyBaffies:
    I'd go along with a welder's clamp.

    What do we win?
No one has figured it out yet

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/21/2018 2:43 pm

    Quoting s2ndegree:
    Medevil ear piercing device or an East German swimmers nose plug
    from the 50's and 60's you couldn't tell the difference between the ones the mens team used or the womens team used but back then you couldn't
    tell the difference between the mens team from the womens.A welding clamp perhaps.
the medieval part looks right. Yeah, those east Germans were an interesting bunch huh.

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/21/2018 2:40 pm

    Quoting  :

To handcuff someone or something very small

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


Classynails 66F
1675 posts
2/21/2018 12:01 pm

I'm very mechanically declined but I am going to guess some sort of C-clamp? Pipe clamp?

Classy, Sassy, and a little Smart-Assy
Sine Metu
CN


citizen4722 66M  
74582 posts
2/21/2018 9:10 am

Not a clue?


MyBaffies 54M
4983 posts
2/21/2018 1:04 am

I'd go along with a welder's clamp.

What do we win?

Baffies

Link to my blog: MyBaffies


s2ndegree 65M
9800 posts
2/20/2018 10:09 pm

Medevil ear piercing device or an East German swimmers nose plug
from the 50's and 60's you couldn't tell the difference between the ones the mens team used or the womens team used but back then you couldn't
tell the difference between the mens team from the womens.A welding clamp perhaps.

Using more than all the road!


SeaGirlFL 60F
9220 posts
2/20/2018 7:53 pm

Hahaha! Yes, he will give me shit about that.

"Sometimes the most productive thing you can do is relax." – Mark Black


redrockrascal 65M
23580 posts
2/20/2018 6:37 pm

    Quoting SeaGirlFL:
    I'll tell him I heard some guys talking about it at Lowes...lol.
Ohhhgood a HD guy will love that

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


SeaGirlFL 60F
9220 posts
2/20/2018 6:12 pm

    Quoting redrockrascal:
    The tool site is called Garage Journal. Maybe not tell dad where you heard about it.

    A specialized clamp yes, but for personal or job usage?
I'll tell him I heard some guys talking about it at Lowes...lol.

"Sometimes the most productive thing you can do is relax." – Mark Black


redrockrascal 65M
23580 posts
2/20/2018 6:08 pm

    Quoting SeaGirlFL:
    Hm...my dad is a tool guy (his "retirement" job was working in the tool section at the home store with the orange buckets)...he'd love that site.

    Definitely looks like a specialized clamp of some sort....

    Pretty cool.
The tool site is called Garage Journal. Maybe not tell dad where you heard about it.

A specialized clamp yes, but for personal or job usage?

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/20/2018 6:04 pm

    Quoting Naughtypursuit:
    I would use this tool to remove Mclindo's nose hairs....lol.

    It looks like a quick release type clamp.

    I have a huge garage full of tools ....by the way...if you are ever in the neighbourhood I would give you a personal tour.
You seem to know your tools I would love to show you mine too.

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/20/2018 6:03 pm

    Quoting lindoboy100:
    What are ye sggesting McScally??

    Okay, okay..........anti-diarrhea device??

    Plook squeezer then?? (plook = pimple)
Wow ! ! ! From hairy nose to hairy arce in an instant

Good thing ye supplied a plook definition cause I really needed to know THAT one.

P.s. Mc Naughty has an offer here fer ye.

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


SeaGirlFL 60F
9220 posts
2/20/2018 5:26 pm

Hm...my dad is a tool guy (his "retirement" job was working in the tool section at the home store with the orange buckets)...he'd love that site.

Definitely looks like a specialized clamp of some sort....

Pretty cool.

"Sometimes the most productive thing you can do is relax." – Mark Black


Naughtypursuit 56F  
2766 posts
2/20/2018 5:19 pm

I would use this tool to remove Mclindo's nose hairs....lol.

It looks like a quick release type clamp.

I have a huge garage full of tools ....by the way...if you are ever in the neighbourhood I would give you a personal tour.


lindoboy100 61M
23969 posts
2/20/2018 4:39 pm

    Quoting redrockrascal:
    Of course the first odd answer comes from McKilty
What are ye sggesting McScally??

Okay, okay..........anti-diarrhea device??

Plook squeezer then?? (plook = pimple)


redrockrascal 65M
23580 posts
2/20/2018 4:24 pm

Of course the first odd answer comes from McKilty

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/20/2018 4:24 pm

    Quoting Tmptrzz:
    Interesting my hubby says it looks like a welding clamp..
Yes, I suppose that is a possibility

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/20/2018 4:23 pm

    Quoting Heathen_G:
    I do wood working and some metal working, so I would find some use for it.
Probably would be handy for a number of things given the small size

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


redrockrascal 65M
23580 posts
2/20/2018 4:22 pm

Yes it does have a bit of a resemblance to those.

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


lindoboy100 61M
23969 posts
2/20/2018 4:15 pm

Is it a nose hair plucker??


Tmptrzz 61F  
107039 posts
2/20/2018 4:10 pm

Interesting my hubby says it looks like a welding clamp..

Seduce the mind and see what a wonderful adventure the body will take you on..


Heathen_G 65M
7974 posts
2/20/2018 4:04 pm

I do wood working and some metal working, so I would find some use for it.


Brownie202 67F  
2680 posts
2/20/2018 4:02 pm

Old style vise grip?

Humans are the most dangerous animals on earth.

If only animals had the ability to know when to keep away from us humans they would be better off.


redrockrascal 65M
23580 posts
2/20/2018 3:52 pm

Would you use this tool?

When the going gets weird, the weird turn pro.

The only thing we have to fear is fear itself.


Become a member to create a blog